Space Adventure Cobra Hueforge
Print Profile(1)
Description
Boost Me (for free)
Project: Cobra.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x239.03mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Jade White
At layer #17 (1.44mm) swap to Red
Border Only Colors from here until the end.
At layer #27 (2.24mm) swap to Jade White for the rest.
License
Comment & Rating (21)