Safety 1st Stair Gate Hold Open
Print Profile(1)
Description
Commercial License for all my designs available on my website: The3DSmith.com
Boost Me (for free)
Boosts are free, so if you enjoy my work feel free to share some love! :D
Safety 1st Stair Gate Hold Open
This was designed to be used on the Safety 1st Auto-closing Stair Gate for those times that you actually don't need it to be closed and what to hold it open.
Please keep in mind that once kids are around it is wise to remove it and get the gate closed again.
Printing instructions:
You want this part to be robust so here is what I recommend.
- 0.2mm Layer Height
- 3 Perimeters or more
- 25% Infill or more
- Print on the orientation below to avoid delamination between layers while using.
Supports are only needed for the start of the top inner edge, after that is 45degrees overhang so your printer will manage without supports.
Commercial License for all my designs available on my website: The3DSmith.com
Boost Me (for free)
Boosts are free, so if you enjoy my work feel free to share some love! :D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)