Happy Dog - Multi-Layer Multi-Color AMS Print - Few Material Changes Save Material
Print Profile(1)
Description
Based on the original AMS, I have made height-based layering. Originally, three colors required six material changes, now four colors only require three changes.
Note: This version is for the AMS version, with only one pause to add the magnet.
Still a 20*1mm round magnet, embedded, with a 21*1.2mm hole reserved, pause to place, remember that the magnet should not be higher than 1.1mm, otherwise it will damage the nozzle!
There is also a version where the support is removed after printing, and the magnet is glued to the reserved hole. This version does not need to pause and can be printed directly with AMS. Please refer to my early models on my homepage for details.
However, this version is a test of the magnet's back adhesive strength. If it is not strong enough, it is easy to detach from the model.
I have uploaded another version with a pause to change colors, which will be categorized in my collection as I make more.
Boost Me (for free)
Go!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)