Elgato Stream Deck XL Dual Angled Stand - Free 3D Print Model

Search models, users, collections, and posts

Bytepond

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

X1E

X1 Carbon

H2D Pro

H2D

H2S

H2C

P1P

P2S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

2 plates

5.0(13)

Bambu X1C - 0.2mm layer, 6 walls, 30% infill, hole modified

2.4 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

122

296

271

150

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M3 Socket Head Cap Machine Screws (SHCS)

Round Magnet

Round Threaded Brass Heat-Insert Nut

List other parts

M3x4mmLx5mmOD-heat-set-inserts x 1: https://www.mcmaster.com/94180A331/

Description

Check out the new version, TriDeck, here!

I wanted a stand to hold 2 Stream Deck XLs, but the only available options weren't at the angle I wanted, or were $50+ on Etsy, which wasn't ideal. So I designed this stand from scratch. It uses 12 5mmx2mm magnets to magnet to the stream decks like the OEM stand, costs around $2.50 in filament, and is nice and sturdy and practically invisible behind the stream decks.

It prints on 2 plates and requires 24 5x2mm magnets, 8 M3x6-8mm screws, and 8 M3 heat set inserts with an outer diameter of 5mm. The heat-set inserts are not available through Bambu, but Amazon carries them. Just make sure they have a 5mm outer diameter.

If there's interest and I have the time, I may try to make a hardware-less version to make it even easier.

Comment & Rating (27)

@behanzer

Boosted

Wonderful design, actually a smart design for the magnets... after all we never mess up the polar right??? easy assembly! Kudos! Best design I have come across so far for angles and to put to gather. :)

The designer has replied

@bytepond

I’m glad you like it! It’s definitely handy to be able to get the magnets back out again

@user_2217238106

just made this, dope design!

The designer has replied

@bytepond

That's awesome! I'm so glad it worked for you!

@hparsons

Boosted

This was perfect for our church

@SThompsonRAMM

Boosted

I love this rack. Silly question, but do you just press fit the magnets or somehow glue them in? Not sure if there is a way to add a layer to the backs of the magnet holes to apply glue. Either way, I cannot wait to use this rack!

The designer has replied

@bytepond

The magnets just press fit in. It’s a tight fit so they don’t fall out and hole the stream deck fairly well

@SThompsonRAMM

Boosted

Replying to @bytepond :

Thank you so much! I announce for high school baseball and use Stream Deck for many effects. I added another Deck this year and was looking for a solution for two decks. Your stand is EXACTLY what I was hoping for. My inserts are showing up tomorrow and I'll be putting this beautiful stand together. Thank you again!