Christmas Napkin Holder

A nice festive napkin holder that has the inscription of “Have a Very Merry Christmas” embedded on both sides. This is a remix from https://makerworld.com/en/models/81702#profileId-86991 and was requested by my wife so I thought I would share.

Supports:

You will have to have supports but they come off very nicely with a little care minding the antlers. If you are too rough with the supports you will risk breaking the antlers. I pried from base first and then they came off nicely.

Infill:

I went overboard on the infill at 50% for the base as I wanted it to be a little heavier but feel free to save yourself some time and filament by lowering this down to 25 or whatever you feel is comfortable.

Remix:

Removed the original platform that this was on and sliced the original deer splitting in two using only one half. I added my own primitive base and included the text on on each side.