Power_Chainsaw_Man (Power, Chainsaw Man - Power - Pawa)

Power_Chainsaw_Man（电锯人-パワー-帕瓦）

电锯人中帕瓦和电次的名场景，你中有我，我中有你，到最后彼此依托。

Project: power.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x175.86mm & 120x105 （70% excpet high） in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #11 (0.96mm) swap to Black
At layer #16 (1.36mm) swap to Red
At layer #21 (1.76mm) swap to Jade White for the rest.