19-inch Modular Rack Mount Blanks - Free 3D Print Model

Search models, users, collections, and posts

Mauker

Tools>Gadgets

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 20% infill

Designer

4.2 h

2 plates

4.9(32)

Open in Bambu Studio

Boost

189

795

905

349

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M5 Flat Head Socket Cap Machine Screw (FHCS)

List other parts

M5_Hex_Nuts x 3:

Description

A 1U rack-mount blank for 19-inch racks. Printed in two parts.

I've included two versions. A solid one, and another with a honeycomb pattern. Both are 4mm thick.

This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out the other 19-inch mount modules.

I've also added the .step file for the blanks, which should facilitate making remixes that are compatible with my modular system.

Boost Me (for free)

I make these models for free, and it takes time and material to test them out. Your boost will help me keep releasing new models! Thank you!

Do you like my models? Consider buying me a coffee ;)

Parts

3x M5 screws (Min size: 12mm, recommended size: 16mm).
3x M5 hex nuts.
OBS.: The mounts should also work with M4 screws and nuts.

Assembly

OBS.: The modules used in this tutorial are only for illustration purposes, and I'm using it for the whole series. It might not reflect the models you download at this page.

To assemble the parts, insert the 3 screws into the Right module.

Then align it with the Left module.

After that, insert the hex nuts in the screws, and using a screwdriver or allen key.

Tighten the screws until you start feeling resistance and the nuts are securely into place. After that, you can install the mount in your rack.

Print Settings

Rafts:

Doesn't Matter.

Supports:

No.

Resolution:

0.2 or 0.24

Infill:

20% or more

Filament:

PLA/PLA+/PETG/ABS/ASA/Nylon

Comment & Rating (42)

@EaglyRare

Print Profile

0.2mm layer, 3 walls, 20% infill

This printed out great! I did some unique Modifications for a local networking company and customized them! This was a very challenging task and took several attempts to get the results I wanted but that was on me. I wanted the raised letters for the affect and that was the challenge! I am going to try another version with the graphics flush but I really like the raised letter look! This made my friend super happy to see what I did for his company!

(Edited)