Wall Mount for Switch (Rack) Legs - Free 3D Print Model

Search models, users, collections, and posts

Simeon Sheytanov

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 15% infill

Designer

1.9 h

1 plate

4.7(7)

4mm Rack Leg Slot - 0.2mm layer, 4 walls, 15% infill

Designer

1.8 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

243

159

Released

Description

I've modeled those legs, so I can wall mount my Mikrotik CRS326-24G-2S+RM. They are made for 4.5x40mm wood screws (I'll use wall anchors to mount them to a wall). The second pair of holes is to mount the switch securely to the brackets. They use M4 nuts & bolts, you can use any round head nut for the mount.

I suspect that this will work for any rack hardware, since the legs are usually the same, but please test it and give me feedback if possible. Also keep in mind the weight of your hardware. The Mikrotik weights in about 1.3kgs, so it's pretty light and the brackets will hold it no problem.

Comment & Rating (16)

@neverlate

Print Profile

0.2mm layer, 4 walls, 15% infill

not entirely sure why use a nine standard bolt size for rack ears as the size xyz you have used does not offer much compression onto the ear as would have been the case if you used the standard m6 etc. appreciate you work on this and sharing. thanks!

The profile uploader has replied

@ssheytanov

I have only the switch I used for the picture, if you give me size size of the brackets you have, I can design a model for those as well

@neverlate

Replying to @ssheytanov :

that’s extremely kind of you. thank you. M6/M8 would be industry standard. We try to use M8 predominately.

@ssheytanov

Replying to @neverlate :

And what is the length of the bracket ear, seems to be quite a lot room left for a more sturdy bracket?

@flashback830

Print Profile

0.2mm layer, 4 walls, 15% infill

@Varis

Unsrew the metal holders, turn by 90 degrees and screw them back... And you can wallmount by out of the box :)

The designer has replied

@ssheytanov

I didn't think about that xD

(Edited)

@Varis

Replying to @ssheytanov :

Welcome! But in some other vendor holders, this will work like a charm! 👍 Happy new year!

@xRobothrusteRx

This is exactly what I needed since you cannot get wall mount brackets from Mikrotik for certain switches. Thank you! I will send pictures once I get it mounted.