Gloomhaven / Frosthaven / JOTL Standee Tracker
Print Profile(4)
Bill of Materials
Description
/Update 1:
I have added +10 rings that can be stacked under the tracker.
Each disk is 2mm thick and represents 10 HP. I chose 10 HP instead of 20 HP so you don’t have to keep flipping the tracker disk.
For example, a monster with 60 HP gets the standard tracker and 4 x +10 disks. You track HP normally with the rotating disk, and once you drop from 10 HP to 0, you remove one disk.
Magnetic Health Tracker for Enemies in Gloomhaven.
You'll need to buy 8x2mm round magnets, you can buy them on Amazon. You will need 3 Magnets for every Standee.
After printing, you can snap the magnets into place—they fit very well, so normally no glue is required, but it could depend on your print settings. Be mindful of the correct polarization.
One side of the disc has numbers from 1 to 10, and the other side has numbers from 11 to 20. Since the discs are magnetic, you can quickly flip between sides as needed.
Boost Me (for free)
If you like my Design, im happy for every Boost. :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (184)