Gyarados Multicolor - Free 3D Print Model

Search models, users, collections, and posts

entroisdimensions_figurine

Miniatures>Creatures

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

61.3 h

1 plate

4.8(51)

Open in Bambu Studio

Boost

998

2179

2 k

358

Released

Description

Gyarados is now available, and you have the choice between different file formats:

STL
3mf for Multicolor Bambu Lab printer
3mf for Multicolor Prusa printer

Video of printing the model: Instagram, TikTok, YouTube

For printing, I used PolyTerra PLA filament from Polymaker:

colors version:

Shiny version :

7 colors version:

To discover which new models will be released next, follow @polymaker_figurines:
Instagram, TikTok, YouTube

Join the Figurines Community on Discord

Happy Printing!

-----------------------------------------------

Printer settings on the Bambu Lab X1C

Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Filament brand: Polymaker
Filament color: blue,pink red, beige, white, black
Filament material: PolyTerra PLA

Comment & Rating (70)

@Doctopolis

Print Profile

0.2mm layer, 3 walls, 10% infill

Absolutely love the way the red Gyarados came out! I only have one AMS, so I had to make adjustments to color but still am super happy with the results! Some smaller supports were a little bit tough, and be careful with the tail!

@beatnikbandit

very kool 😎 👍

(Edited)

@user_2518202690

how many hour does this took

(Edited)

@Asena

How many colors did you use

(Edited)

Show original

@650101965

Boosted

I did my best with this one. Ended up having to split the model in half to print with 4colours first and then print the other half with 4 colours. Ran into some problems ( my fault) and some edges didnt come out as smooth as I would have liked. the bottom stuffed up on me and so i filled it all down and glued in on the water. As the program shut down on me I lost the split, as it was too late to start the reprint I kept going. I ended up using crayola doodle scent markers to colour in the mouth. It did an okay job. My friend still wants it so I was still happy to work on it and do the best I could with it. Im not pokemon inclined however I really appreciated the detail and the size of the print. Thanks

@user_2593643467

It turned out like crap man but you gave it a good shot

Show original

@ShadyPrints

Print Profile

0.2mm layer, 3 walls, 10% infill

this is absolutely my favourite print! and stunning quality! well worth the wait

@fuwafuwadaikon

Print Profile

0.2mm layer, 3 walls, 10% infill

Such a beauty! I love it so much. Support was a bit difficult to remove but the work was absolutely worth it! Printed With A1 and 4 AMS. Thank you so much for this model!

@h2so4hurts

Lost an ear and a whisker during the initial print but printed replacements, glued them back on, and used a soldering iron to smooth out the seams. Print this one slowly for best results (like 150mm/s).

@shay13542

Print Profile

0.2mm layer, 3 walls, 10% infill

Big like!

@TallyWhackr69

Print Profile

0.2mm layer, 3 walls, 10% infill

Excellent model

@user_2739417527

Boosted

First printed the Shiny because with the original I changed the teeth to "bone" color, so I need 9 colors. And therefore an AMS extra. So we have to wait a bit longer.

Show original

@feixinlong

Print Profile

0.2mm layer, 3 walls, 10% infill

good

@cubiletes

Print Profile

0.2mm layer, 3 walls, 10% infill

buena

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.