RC Car Steering Linkage
Print Profile(2)
Description
I created a easy to print and use RC Car linkage for easy repair of linkage arms. The linkage has a print-in-place movable joint so that it can perfectly follow the RC cars wheel and body movements. The movable joint is printed with a very small support that easily breaks away after print - just give the joint a few moves with a pair of tweezers or a screwdriver.
The base of the linkage is designed to be used with a 4mm threaded screw or rod that you cut to desired lenght. The thread should ideally have 0,75mm rise but 1mm is fine aswell.
The hole in the movable joint is 3mm in diameter, so use a M3 screw or smaller.
Boost Me (for free)
Please consider a boost if this model helped you out :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)