Triangle pattern bag

!!!! A1 Series Printing is not recommended, the fixing clips may collide !!!! I used P1P and it is more convenient to fix the clips

The 9th layer will pause, put in the mesh, spread it out, clamp it in three directions with dovetail clamps, and you can use a magnet to hold the protruding part.

Layer 10 and 11 are recommended to print at 50% speed, and then you can return to the normal speed.

Print two copies, then sew the three sides together with a sewing machine, with the side that contacts the print plate facing outwards.

(In picture 4, I turned the inside out, and after sewing, I tried to turn the inside out, but I failed, so the sewn hem can only remain on the outside.)

The fixing method is shown in the picture. The red circle needs to be fixed with clips.