Thunder Lizard
Print Profile(0)
Description
Boost Me (for free)
For learning and exchange only, commercial use is strictly prohibited.
After joining the group, you can directly print with automatic support at 0.16m, or you can print according to the following parameters or adjust the angle for printing. The photopolymerization and disassembly versions of this material are not uploaded. If you need them, you can contact me to request them. If there are many people, I will directly upload and share them.
The base view originally used an elliptical base, which I felt was too ordinary and changed it to the current base. The current base is relatively large, if you only want to place one, it is recommended to reduce the size or increase the size of the dinosaur model.
Thunder Lizard★★☆
It lived in Brazil during the Early Cretaceous period, with a body length of 11m and a weight of 200kg
(Information from Douyin Encyclopedia and Baidu Encyclopedia)
Printing configuration is as follows (all my works use this parameter):
layer height: 0.12-0.16mm
first layer: 0.3mm
seal: Align, outline and holes
strength 3 layers, concentric top
density 10 lines
merge fill
speed first layer 30
support: Automatic organic tree,
first layer extension 5mm
top z distance 0.1-0.14, bottom z distance 0.16
top contact layer 4, bottom 3, concentric structure, xy spacing 0.5mm
I beg for your help!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)