M0001 Macintosh 128 512 Plus Drive Carrier

This is a replacement for the floppy drive carrier inside the original line of compact Macintosh computers released in 1984 and will work inside a Macintosh 128, Macintosh 512K or Macintosh Plus. It is about 1mm larger on the exterior surfaces than the original aluminium/aluminum part, but internal dimensions are identical.

I STRONGLY suggest to print this model vertically with a large brim with no offset, to ensure bed adhesion and using ABS for strength and to prevent deformation due to heat. By printing vertically you avoid a potential failure scenario where layers come apart due to shock or some other reason and the drive comes lose inside the case and destroys the CRT. You have been warned.