Demon Slayer Lamp - Tanjiro Earrings

This is a Demon Slayer Lamp based on Tanjiro Kamado's earrings. The lamp is constructed in two parts, the Shade and then the base that holds the Bambu Lab lamp light.

There are 3 different configurations.

1. Lamp with Bottom Base only, no Legs.
2. Lamp with Bottom Base and Legs.
3. Lamp with Wall Sconce Mount.

Configuration #1: The lamp can set on the Bottom Base only, no Legs needed.

Configuration #2: The Lamp with Bottom Base and Legs. There are two version of this. The Bottom Base and Legs can be printed separately, easier printing, no supports. This will require the Bottom Base and Legs to be glued or screwed together. Or, The Combined Base with Legs comes in one piece but requires supports when printing.

Flavor #3: A Wall Sconce Base for mounting on the wall. This base comes in one piece and will require supports to print.

The Lamp Shade consists of 6 pieces: 4 Shade Panels, 1 Shade Bottom and 1 Shade Top. These are designed to be a friction press fit to require no glue. However, they can be glued together if you so choose.

The Shade simply sit's on top of the base, with groves to hold it in place. This make for easy access to the light source for whatever reason.

**To prevent the infill pattern or strange lines from showing in the lit shade, I recommend printing the four Shade panels at 100% Infill. The shade is only 3mm at it's thickest point so it doesn't increase the time much.

Like all my designs, If you have any issues, please reach out as I am always happy to help. I've even redesigned parts with a higher tolerance level for printers with less than desirable dimensional accuracy.