Interstellar Endurance Space Station Stand Display Version (Rotatable) - Free 3D Print Model

Search models, users, collections, and posts

炒面分析员

Toys & Games>Construction Sets

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.28mm layer, 2 walls, 15% infill

Designer

8.4 h

1 plate

4.9(12)

0.28mm layer, 2 walls, 15% infill

Designer

7.2 h

1 plate

4.7(6)

Open in Bambu Studio

Boost

352

817

636

211

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

If you like it, I hope you can give me a boost, thanks!

1、This is the stand version, it takes about 5 hours to print in kinetic mode

2、It is recommended to print with PETG

3、Some parts are relatively brittle, it is recommended to fill 15% or more to be more stable

4、Acrylic markers with soft heads can be used for coloring, the effect is excellent

5、There is also a refrigerator magnet version, you can check my homepage

6、You can install 7*14*5 bearings for smoother rotation.

7、The round one is a replacement part for the bearing, just install it and connect the two parts.

Comment & Rating (24)

@user_2948992258

Boosted

Print Profile

0.28mm layer, 2 walls, 15% infill

Brutal, I colored it and scaled it to 120% Printed on a Bambu A1

Show original

@Thundaar

Looks excellent! Would you mind sharing the colored version?

@mickey.freedom

Print Profile

0.28mm layer, 2 walls, 15% infill

The overall quality is excellent, however, the ring-shaped bearing components of the stand are somewhat loose when assembled with the spaceship

The profile uploader has replied

Show original

@flay9527

Loose to rotate

Show original

@RamosUnity

Boosted

Print Profile

0.28mm layer, 2 walls, 15% infill

really awesome model that printed perfectly with provided profile(s). stand works very well and spin is nice. it does feel a *tiny* bit fragile, but it's a showpiece not a toy. Must print for sci-fi/Interstellar fans.

The profile uploader has replied

@flay9527

Setting the Sparse Fill setting to 25% will make the model harder.

@Aiden2127

Print Profile

0.28mm layer, 2 walls, 15% infill

Good and detailed! I printed with PLA and changed to normal support because tree support failed.

@Subpop

Boosted

Print Profile

0.28mm layer, 2 walls, 15% infill

printed in White ABS. great Design

@Qazan

Print Profile

0.28mm layer, 2 walls, 15% infill

I like this film.SUPER

@IMFIL

Print Profile

0.28mm layer, 2 walls, 15% infill

Very beautiful but I had to insert a metal pin to support it

Show original

@SiTo83

Print Profile

0.28mm layer, 2 walls, 15% infill

Increible

@dreamanchik

So uh... the model itself is fine. Small details are printed nicely. But if you compare the model its just wrong First of all the overall ring is upside down. It is most evident by the "square boxes" inside 8 ring parts, that are on the front instead of being on the back Then the... engines ig? They are on the side in the front for some weird reason, instead of just being on the back. It is evident by the fact that the number and positioning of these circles is the exact same as the original engines, but instead they are placed facing inward, making thrust inefficient Everything else is fine, its a nice model to place on a shelve and forget about every problem it has. But its still irritating

@MasterGadget64

Hello, do you mind sharing the STEP files for this. Thanks 🙏

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.