Super Slim Foldable HairBrush + Comb - Free 3D Print Model

Search models, users, collections, and posts

FunOrNothing

Fashion>Other Fashion Models

IP Report

GIF

Print Profile(2)

All

H2D

H2D Pro

P1P

H2S

P1S

A1 mini

X1E

X1 Carbon

P2S

H2C

X2D

A2L

MultiColor, Two plates

Designer

2.1 h

2 plates

4.4(28)

Single Plate, No AMS

Designer

2 h

1 plate

3.9(28)

Open in Bambu Studio

Boost

389

946

945

639

Released

Description

Congratulations on finally discovering FunOrNothing :)

New Version Link(Assemble Type, more bristles, no comb)

____________________

A while ago, after designing a foldable hairbrush model, I thought it would be better if I added a comb function.

(My previous design link)

Compared to a design with only a hairbrush function, I increased the thickness by 2mm to add a comb function. I wanted to make it thinner, but the results of several tests showed that if it was thinner, the comb would bend and it would be difficult to use properly. However, on the other hand, the grip was improved.

The comb can be used by simply sliding it, and it is designed so that it doesn't fall out completely to prevent loss.

This model is also made of two printed parts: the body part that includes the brush and the handle part that includes the comb, and assembly is also simple.

After printing the brush part, press both ends to unfold it. (You need to press a little hard at first.)

For the handle part that includes the comb, if it's difficult to slide after printing, twist it a little and then hit it on the desk with the protruding comb part facing down.

Now, assemble the two parts as shown in the picture and you're done.

Boost Me (for free)

My designs are not for me, but for you.
If it made you smile or sparked an idea, a little boost would be awesome. 😊
And hey — feel free to check out my other creations too!

IMPORTANT!

If the seam does not stand up after printing, lower the flow rate and print slowly. The tolerance of this model is 0.2mm, so in most cases it will print well, but the hinge size is very small, so depending on the printing environment such as the type of filament, the hinge may stick due to excessive flow.

__________

01/09/2026 Model Update

The model has been modified to ensure that the comb stays in place when folded.

Hope you Enjoy this model.

As always, I welcome your feedback.

Click to Check out FunOrNothing's interesting designs.

Boost Me (for free)

Your boost helps me spend more time creating better designs. And don’t forget to check my other models — you might discover something useful! 😊

Membership

The best way to support my work is to join the FON membership. You can be my Supporter, Seller, or Partner. If you join the membership, you can communicate more closely with me through Discord.

Join

You can be a friend who encourages me by buying me a cup of coffee.

Comment & Rating (92)

@Icefirefort

Boosted

Pinned by Designer

Print Profile

MultiColor, Two plates

Absolutely brilliant. I was specifically looking for this, and it is better than I could have dreamed. Also found a paper mirror strip in dashing diva nail stickers fits perfectly (but be careful of warping).

@ambrose

Boosted

This looks really cool but I couldn't get the bristles to pop up to expand the brush - looks like the first few layers fused the parts together - I'm not seeing those spaces between the bristles. I took a knife and cut around the bristles, but it still didn't help. Any tips on how to get more spacing between the bristles? I'm using the default .4mm nozzle. Should I use a smaller nozzle? I guess I can scale this up as well.

The designer has replied

@FunOrNothing

0.4mm nozzle is fine. Check each bristles separated. I printed it several times and never failed.

@ambrose

Boosted

Replying to @FunOrNothing :

Maybe it's the plate. I'm using the pei textured gold plate maybe that's why the small gaps are being sealed? What plate do you print on?

@FunOrNothing

Replying to @ambrose :

I also use the same plate. Plate can't be an issue if your first layer is fine.

@Chris767

Print Profile

Single Plate, No AMS

My favorite accessory, I can't do without it anymore Just a few curses to get it working, but a little patience was all it took

The profile uploader has replied

Show original

@FunOrNothing

Thanks for loving it. :)

@Lebanese_Jesus

Print Profile

Single Plate, No AMS

pretty solid print, it was kinda hard to unstick the comb from itself, but that was very small issue

The profile uploader has replied

@FunOrNothing

Looks great with black color. Thanks

@gatitanegra

At first a bit hard I couldn't open the spikes but in the end I found the trick and it works perfectly

Show original

@mkbby

Print Profile

MultiColor, Two plates

Interesting design

@JoeA789

Boosted

Ingenious design. I may try printing in PETG to see if the Brush is any softer. But works great for surprise video calls. It was a bit hard getting the Brush part to separate until I squeezed it exactly as shown in the GIF.

GIF

@gdking74

printed ok but brush bristles are wonky some are too tight some are too loose, the comb also is hard to get out but after getting it out it becomes too loose

@lucasoctave

Boosted

Print Profile

MultiColor, Two plates

@user_3056543832

Boosted

should this be printed in petg/abs or does pla do well enough under load?

The designer has replied

@FunOrNothing

PLA is durable enough in my experience.

@dibsmpuuf

Print Profile

MultiColor, Two plates

This is a great design. The mechamism works flawlessly. The brush was very hard to open the first time, but now I don’t have any problems to open it. The bristles are quite hard and it isn’t that comfortable to use, so this isn’t something I will use daily. It is great for an emergency through.

The profile uploader has replied

@FunOrNothing

Thanks for the kind words. why don't you shrea your pictures as well. I recommend you to add pictures at your original comment rather than aditional one. so your pictures will be easy to show.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.