Cylindric

0.2mm layer, 2 walls, 100% infill

gian55

cover

466074396_10235585117592316_2618614525982674696_n.jpg

1731156509608.jpg

466049360_10235584993749220_6627101536498977268_n.jpg

amiga workbench.png

plate_1.png

Mr.Oizo

Printpic_1.jpg

Printpic_2.jpg

Here&#39;s  a complete print file adjusted to a little bigger size, modified with places for magnets and set with enough depth for the colored layers  not to get a bleed through from the black back.&nbsp;-The magnets I used for this project are 19,3mm*1,3mm. It&#39;s easy to adjust the negative object sizes from the object list to suit your preferred magnet sizes. My magnets were 19,3mm in diameter and I allowed 0,2mm clearance for perfect fit.&nbsp;-Use a little dab of CA-glue for every magnet.&nbsp;Happy printing!

This is my fridge magnet of the boot screen from Commodore Amiga (1985).Use the glue on the back to place 2 small magnets.

Amiga Workbench Fridge Magnet

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models