P1S/X1C Glass Door Corner Accent

Add a touch of colour to personalise your printer's glass door with this simple vase-mode print. Slots in place without adhesive. If it's loose, add a bit of Blu-tack. 

Also serves as a visual cue so you don't poke yourself in the eye when the door is open. Works great with bright colours or dual/triple filaments. Can be placed on both top and bottom corners.

An STL file for 0.6 mm nozzles is provided and I find it produces cleaner vase mode prints. The 0.6 mm version doesn't fit the bottom corner as the walls are thick.

Update: The 0.6 mm version has been updated to remove the top few layers to improve print quality and fit. You may still need to nip off the initial blob of the elephant's foot.