Decora Keystone Jack Wall Plates - Free 3D Print Model

Search models, users, collections, and posts

sstevenson72

Household>Other House Models

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 100% infill

Designer

1.9 h

1 plate

4.9(16)

Open in Bambu Studio

Boost

229

305

223

Released

Description

This is a set of decora keystone wall jacks. I found that I needed a different combination of slots then what was offered already online. So I created a project with multiple plates. This is a simple project and much cheaper to print your own vs buying them online. Print and Go.

EDIT 1/23/2021: Reinforced a weak area and added a 4 port version of the plate.

Print Details
Layer Height	.2
Supports	Yes / Tree Auto / Critical Regions
Infilll	100%
Wall Loops	3
Filament	PLA

Coffee Always Welcome!

Comment & Rating (31)

@techmage

The print profile is no longer public

broke a bit when I installed it but some glue fixed it right up.

The profile uploader has replied

@sstevenson72

Where did it break? I may be able to strengthen area. Also to make sure you were printing at 100% infill?

(Edited)

@techmage

Replying to @sstevenson72 :

The back portion of the plate for the RJ45. The thin part broke as I attempted to insert the keystone

@sstevenson72

Replying to @techmage :

What number of openings were you using? I attached the drawing that shows a thin cross member and a thicker one. I assume this is the part that broke?

(Edited)

@LumpyLemming

Boosted

Print Profile

0.2mm layer, 3 walls, 100% infill

nice print, supports were a bit of a pain but that was expected

@Qabsolute

Boosted

The print profile is no longer public

Superb Print and excellent design

@Bluedigital

This is so close to what I needed. I've searched maker world in many different ways and I just wan a blank adapter, just like this. is there any way you can add a version without the jack ports? just solid

The designer has replied

@sstevenson72

I can look into making a blank if you would like the design allows it pretty easily.

@Bluedigital

Replying to @sstevenson72 :

that would be awesome!! Thank you very much

@EHMONROE

Boosted

Print Profile

0.2mm layer, 3 walls, 100% infill

These printed perfectly in PLA basic on my X1C. The keystones went in a bit tight but didn’t require modification. Thanks for sharing this model and saving me a few bucks.

@VersusMakes

With what type of keystone is this for ? cause i dont see how mine would stay in these plate.

@Datura_House

Print Profile

0.2mm layer, 3 walls, 100% infill

Excellent !

@RDaneel

Print Profile

0.2mm layer, 3 walls, 100% infill

Thanks for helping me save a little cash!

@frigon.info

Print Profile

0.2mm layer, 3 walls, 100% infill

Excellent!

@user_269147891

My keystone jacks are too big to fit in all the slots I can get one in, but I cannot get the second one in next to it. Need a LITTLE bit more space for my keystone jacks unfortunately.