High-quality Hikvision 4117 module housing
Print Profile(1)
Description
The PCB component is an open-source thermal imaging camera modification kit developed by Xiao Li Electronics Lab, based on the Allwinner T113-S3 and Hikvision 4117.
November 13 Update:
1. Added a front shell with a 1.2mm board thickness. Please pay attention to the thickness of your own PCB board when printing.
2. The button files have been uploaded.
3. The focus ring is pending upload.
The original shell was fully secured with snap-on clips, and the 4117 and battery were connected with hot glue, affecting aesthetics and safety.
This shell can incorporate an 803040 lithium battery with a capacity of 1000mAh. Real-world tests show that the maximum brightness can last up to 2 hours.
The 4117 module is secured using internal screws, with no external screw heads or protrusions. It also prevents the infrared module lens from being exposed like in the original version, reducing the risk of damage and enhancing aesthetics.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)