Top Glass Slim Riser v1 - X1C P2S P1P P1S

V2 is available : https://makerworld.com/fr/models/1716526-top-glass-slim-riser-v2-with-hinge-x1c-p1p-p1s

Hi everyone!

I present my version of Riser Slim with a hinge for the window of your Bambu Lab.

The print is cut into 6 bodies on 3 plates in the 3MF file.
The objects are printed two by two :

- 2 right and left bodies for the front of the Riser
- 2 right and left bodies for the back of the Riser
- 2 right and left bodies for the part that holds the window with the hinges

1. Once all the parts have been printed, assemble the parts of the Riser using the small lugs

2. Slide the two parts of the window holder with the hinges into the slot on the Riser and insert the glass into the groove

3. Place the complete Riser on the machine by sliding it forward so that the fixings fit into place

4. It's over! Enjoy your Riser now!

• Updated 07.11.2024 :

        - Added hinge models with a stop (slight tilt)

        - Thicker hinge (Rear Hinge Left & Right) 
 

👇🏼 Thank you for your support 👇🏼