Ace Deck X3 Electric Skateboard Tail Protection Handle Tail Light Footrest Camera Mount Speaker Mount Fast Charging Port

This is a tail extension assembly for Ace Deck X3, including tail protection, handle, taillight, footrest, camera mount, speaker mount, and fast charging port.

Durability has been fully tested through frequent use for over half a year. Additionally, the homepage also features a head assembly

Print as needed, not all parts need to be installed. Most of the parts are also applicable to other skateboards.

It is recommended to use the hardest TPU possible (such as 72A) for the speaker mount and tail protection, while the rest is recommended to be printed with PETG.

All original design files have been uploaded for easy modification. Please refer to the uploaded STEP files for assembly instructions.

Hardware Accessories:

The footrest requires a long M5 screw, the specific length varies according to the height. The height is adjusted by adding or subtracting the number of spacers. Additionally, at least two M5*8*7 brass embedded nuts (or shorter) are needed.

The camera mount requires three M4*8*6 brass embedded nuts (or shorter), and three M4 screws with a length of 10~16. Additionally, to secure the camera, a M5 screw with a length of at least 32 and a M5 nut are needed.

The handle requires two M5 screws with a length of 8~20. The handle model is UHFN66, please search and purchase it yourself.

The taillight requires an M3 screw with a length of 8~18. The light strip uses a 5mm wide red COB light strip, please search and purchase it yourself.