Print Profile(3)
Description
Couldn't find a suitable casing so I drew one myself, it can accommodate 14AWG wire. Fix it with silicone or other glue (semi-solid glue is best). The middle hole is fixed with M3*8 round head hex screws and M3 nuts, and the nut can be pressed directly into the hole on one side (the maximum diameter of the nut is equal to the maximum diameter of the round hole). Please choose high-temperature resistant materials such as PETG and ABS for printing according to the usage environment!
Safety Statement: High power does not guarantee heat deformation and fire, and I am not responsible for any safety accidents that may occur
Didn't find a suitable shell and drew one yourself, you can put down the line of 14awg. Fix the hole with silicone or other glue (preferably semi-solid glue), use M3*8 round head hexagon screws and M3 nuts to fix the middle hole, and the nut can be pressed directly into the hole on one side (the maximum diameter of the nut is equal to the maximum diameter of the round hole). Please choose high-temperature resistant materials such as PETG and ABS according to the usage environment!
Safety Statement: High power does not guarantee that it will be deformed by heat and cause fire, and I will not assume any relevant responsibility if there is a safety accident
Updated XT60 male connector
This time I used a 6mm diameter silicone wire, which fits perfectly. Modified based on the female connector, it's installed similarly to the female connector, requiring M3*10 round head screws
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (84)