Bobbin Thread Holder

Bobbin Thread Holder

This model is a custom-designed holder for storing up to 12 bobbins at a time! It's designed for storing them during active use in embroidery, sewing or something similar.

There are two variants: the standard one, with has slots that are 6mm wide, and the alt variant, which has 6 slots that are 6mm wide and 6 slots that are 7mm wide.

The one shown below and in the other images is the alt variant.

The dimensions for the model are provided below:

• Overall Dimensions: 158 mm (length) x 60 mm (width) x 25 mm (height)
• Slot Depth: 20 mm
• Slot Design:
  • Standard slots: 6 mm wide, angled at 15 degrees, 40 mm length (measured straight, excluding rounded 1.25 mm radius ends).
  • Alternate Slot Variant:
    • First 6 slots: 6 mm wide, spaced 5.2 mm center-to-center, starting 10 mm from left edge.
    • Last 6 slots: 7 mm wide, spaced 6 mm center-to-center, ending 8.3 mm from right edge.
    • Transition gap between last smaller slot and first larger slot: 5.2 mm.
• Based on Thread Bobbin Size:
  • Bobbin width: 35.5 mm (including protruding end).
  • Height: 40.5 mm.
  • Material thickness: 0.25 mm (cardboard or filament), with additional thickness for thread wrap.