Rope stand controller xbox and playstation ps5 ps4 - Free 3D Print Model

Search models, users, collections, and posts

Mad power

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.28mm layer, 2 walls, 8% infill

Designer

9.5 h

1 plate

4.7(69)

0.28mm layer, 2 walls, 8% infill

9.8 h

1 plate

4.6(7)

Open in Bambu Studio

Boost

1494

3167

114

3.4 k

1.1 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

D37.2x36.6mm LED Flame Tea Light Candle Set

Bambu Filaments

Select all

PLA Matte

PLA Matte

Description

Content has been automatically translated.

Show original

Boost Me (for free)

⛽ A BOOST is like fuel for my projects! ⛽ It costs you nothing, but you help me fly. Heartfelt THANKS! ✈️

Boost Me (for free)

Click here to help me, it costs you nothing and you will help support my work!

Membership

MakerWorld Commercial License

Join

IF YOU WANT TO SELL MY CREATIONS YOU MUST BUY THE COMMERCIAL LICENSE YOU FIND HERE OR ON MY ------ PATREON

If you want to sell this model, think about who created it and the hours of time they dedicated to it

I printed this stand in silver PLA to simulate a steel rope but if you print it in brown it will give more of a rope effect

I hope you like it and that you will post a photo of the printed project! You can illuminate the base with a small light to make it even more scenic

Below you can find my other projects

Boost Me (for free)

⛽ A BOOST is like fuel for my projects! ⛽ It costs you nothing, but you help me fly. Heartfelt THANKS! ✈️

Membership

🛒 "Do you want to sell prints of this model? The commercial license allows you to: ✅ Print and sell legally ✅ Earn by selling physical prints ✅ Produce without quantity limits Unlock everything today → [Purchase commercial license]"

Join

ps5 accessories organizer

xbox controller holder

xbox controller stand

xbox joystick

xbox one

xbox one controller

xbox one controller holder

Comment & Rating (114)

@Rettungszwerg

Boosted

Pinned by Designer

Print Profile

0.28mm layer, 2 walls, 8% infill

Top print, zero problems

The profile uploader has replied

Show original

@Mad_Power

😍

@West.Prints

do you not find it is too tight a fit?

@Rettungszwerg

Boosted

Replying to @West.Prints :

Yes, it fits snugly in the holder, but that doesn't bother me so much; it elevates it

Show original

@Drado73

Boosted

Great design but not a good print. I had PLA bleed and the support column were truly a mess to take off... All settings were correct. Plus the model is a too tight. You are forced to pick up both the model and controller to take it out of the stand.

The designer has replied

@Mad_Power

You should try to check your filament it makes too much trail you should test my print with a different pla 😊

@chrismendoza

Boosted

Your retraction settings could use tweaking. Although bambu is known to have good initial settings, different environments can cause prints to have issues. Stringing can be highly affected by retraction settings. Was your filament dried before printing? There are calibration prints that change printer settings on various levels so you can see where your printer and a particular filament work best together. I use them a lot when using my ender 3.

@Drado73

Boosted

Replying to @chrismendoza :

@chrismendoza Thanks for the reply! I believe you are right regarding the filament. It was definitely exposed. Since I changed to a brand new roll. All my prints have come out great! Lesson learnt.

@An_dy

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

I also included Fuzzy Skin in the program, and I really like it very much

The profile uploader has replied

Show original

@Mad_Power

😍

@P1nt0

Boosted

a litle tinha for ps5 controller, but works fine for this one

The designer has replied

@Mad_Power

😍

@chrismendoza

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

Came out perfect! 😁

The profile uploader has replied

@Mad_Power

😍

@iBeryl

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

I Love that one

The profile uploader has replied

@Mad_Power

😍

@Lara_Hellmich

Print Profile

0.28mm layer, 2 walls, 8% infill

Perfect and fit with the PS4 Controller

The profile uploader has replied

@Mad_Power

😍

@TPdesign

Love the model. Thanks Mad_power!

The designer has replied

@Mad_Power

I'm very happy you like my work!!!

@kenshh2

Print Profile

0.28mm layer, 2 walls, 8% infill

Is a big effort to remove all the supports. I turned on fuzzy skin default settings and upscaled by 5% to 105 because of the other comments saying how it was too tight. I would recommend going below +5% upscale as its now quite loose!

The profile uploader has replied

@Mad_Power

thk friend 😉

@Valkyrja

Print Profile

0.28mm layer, 2 walls, 8% infill

I did 103% scale and it fits perfect.

The profile uploader has replied

@Mad_Power

🥰

@cubineca

Beauty. Filament Bamboo Lab PLA Wood.

The designer has replied

@Mad_Power

😍

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.