Cat design Hueforged
Print Profile(1)
Description
This art piece belongs to an artist named Wemersoninator. I really liked it and tried to Hueforge it. It came out great. Slicing time is little bit higher than normal but you gotta be patient. To print this here is your instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.24x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 7
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Orange
At layer #23 (1.92mm) swap to White for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)