Toggle Switch Cover - Free 3D Print Model

Search models, users, collections, and posts

LCruz3D

Hobby & DIY>Electronics

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 25% infill

Designer

1 h

1 plate

4.9(35)

0.2mm layer, 4 walls, 15% infill

12.1 h

2 plates

12mm Hole - Toggle Switch Cover

58 min

1 plate

Open in Bambu Studio

Boost

651

1564

731

390

Released

Description

All credit for this system of cover to toggle switches goes to the original uploader firstgizmo. Big thanks to you, for your model and your share of the step files.

I only made changes to accommodate smaller toggle switches like these: Link

There are two versions of the cap one turns off the toggle when its down the other doesn't. (Step and STL file)

Printing In PETG is adviced specially the spring part.

Boost Me (for free)

If you enjoyed this model, please consider giving me a boost to support more creations. Keep printing and may your nozzles never clog. Thank you very much!

Comment & Rating (48)

@neocrisis

Print Profile

0.2mm layer, 4 walls, 25% infill

happy - in case anyone asks, you use the filament itself as the hinge. I dont recall if the description says so. thanks again for a killer usefull design

(Edited)

@neocrisis

I was wondering if you could modify the design. I have several switches i want to add this too. However their insert point in bigger than the insert point on your design. The size of your hole is around 3mm but my switches are around 12mm. thanks