Pipe Notching Tool_ Pipe Coping Guides Coping jigs - Free 3D Print Model

Search models, users, collections, and posts

BasementLAB

Tools>Hand Tools

IP Report

Print Profile(2)

All

H2S

P2S

H2D

X2D

P1S

X1E

X1 Carbon

H2C

P1P

A1 mini

H2D Pro

A2L

PETG_Pipe Notch Guides

Designer

16.7 h

12 plates

5.0(6)

0.2mm layer, 2 walls, 15% infill

12.7 h

9 plates

4.6(5)

Open in Bambu Studio

Boost

353

898

810

268

Released

Description

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees

Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi

Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40, Ø45, Ø50, Ø60, Ø76 - Ø ½" - Ø 1" - Ø 1 ½"

23/05/2025 Update, added Ø60mm, Ø76mm

28/11/2025 Upadate, added Imperial ½" 1" 1 1/12"

Please note: The dimensions for the imperial jigs (e.g., '1"') are based on the nominal pipe size in inches, not the actual outer diameter. For example, the '1"' model corresponds to the standardized 1" Schedule 40 pipe OD of ~1.315" (33.4mm). Measurements will confirm this larger size. If you require a jig for a true 1.0" (25.4mm) rod, scaling the model down to approximately 78% is an effective solution. We recommend always verifying the dimensions in your slicer against your physical part before printing, as not all jigs follow this pipe-size convention.

Resize to adjust dimensions

Boost Me (for free)

All our designs are free to download and use—because sharing drives innovation.
Your support fuels our creativity. Thank you for your boost!
#Bambulab

Comment & Rating (14)

@mcolinwatts

Beware that the imperial jigs are NOT correctly sized. The 1" dia. model is 1.3" or 33.2mm (measured both in Bambu Studio and from a real print). You can scale them down to the correct size (scale 78%) and they still work great. Not all jigs are incorrect, but check in Bambu before you print.

The designer has replied

@BasementLAB

Thank you for the important clarification and the excellent practical tip. You are correct. Please note: The dimensions for the imperial jigs (e.g., '1"') are based on the nominal pipe size in inches, not the actual outer diameter. For example, the '1"' model corresponds to the standardized 1" Schedule 40 pipe OD of ~1.315" (33.4mm). Measurements will confirm this larger size. If you require a jig for a true 1.0" (25.4mm) rod, scaling the model down to approximately 78% is an effective solution. We recommend always verifying the dimensions in your slicer against your physical part before printing, as not all jigs follow this pipe-size convention.

@user_2086004006

Boosted

Spectacular, thank you very much. Warmest regards

Show original

@user_1711719572

Print Profile

0.2mm layer, 2 walls, 15% infill

great print!!!

@user_3045785887

Print Profile

PETG_Pipe Notch Guides

(Edited)

@user_1218175862

Print Profile

0.2mm layer, 2 walls, 15% infill

@Robbie534

Print Profile

0.2mm layer, 2 walls, 15% infill

@Javi_L

Print Profile

PETG_Pipe Notch Guides

(Edited)

@user_12540216

Print Profile

PETG_Pipe Notch Guides

@user_2481599915

Print Profile

PETG_Pipe Notch Guides

@wiki192331

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.