150 Round Loading Tray with Magnets - 308 Bolt Face

Simple 150 round loading block for 308 bolt face cartridges. Each hole is 10mm deep and holds more snug than other types of loading blocks. Print in PLA Marble for a beautiful finish.

Pauses have been inserted at the relevant layers to insert 6mmx3mm circular magnets in each corner near the top layers and near the bottom layers. The model takes 8 magnets total. Magnets get fully printed into the model and hold the trays together as shown. Note: the magnets are not overly strong and can easily be left out. They will not hold the trays together when tilted a ways.

I recommend printing and using my Magnet Polarity tool to install the magnets. Use the same polarity (+ or -) for all 8 magnets.

Magnet Polarity Holders - 6mmx3mm by AngelicAnarchy - MakerWorld