Switch Decorative Shell - The Legend of Zelda: Tears of the Kingdom - Purah's Tablet
Print Profile(2)
Description
🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎
Who reported me!? Didn't I clearly state that I only published on two platforms, and that reprinted links are also marked as reprinted, please verify before reporting, also, if you see any reposted links without attribution, please contact me, and I will report them
2025-4-11
Fixed broken surfaces and partially missing issues
--------------------------------------
2024-11-03
Updated the version with cooling, choose the version with or without cooling according to personal preference
Added a set of raised buttons, those who are hands-on can try replacing them, this should solve the problem of not being able to press the buttons Alternatively, modify the model yourself, sand it down or something (I don't want to modify it, it's too much trouble)
Currently only applicable to the old extended battery version
--------------------------------------
I don't have a 3D printer, the case in the display image was printed with resin material by JLCPCB, I'm not sure if FDM can print it successfully, the model does not have cooling holes, so it is not recommended to wear it while playing games (it will get extremely hot), it is only recommended for decoration, it can be used to decorate an idle NS as an ornament or something
Regarding obstruction: the extended battery version only has a tiny bit of obstruction on the left and right, which does not affect it at all, OLED will be obstructed, but I don't have an OLED, so I don't know exactly how much will be obstructed
Regarding buttons: For me, every button can be pressed, but it might be a bit difficult, after all, everyone's hands are different, if they are a bit larger or have longer nails, they might not be able to press them at all
It is made according to the art book, the three arrows on the back are relatively large, the ones in the game are small (I prefer this art book version)
The data cable head does not need to be printing, because it needs to be fixed with double-sided tape or similar, which is a bit troublesome and hard to remove
I'm not good at disassembling, so I took it apart poorly, the slot might be very tight, so just sand it down
It is best to install according to the illustrated order, first put on the host's case, then install the handles
This was originally made for myself, so it has many flaws,
Only uploaded to MakerWorld and Thingiverse platforms
No commercial use, please attribute when reprinting
Boost Me (for free)
♥感谢你的支持♥
🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎⭒˚.⋆ . ₊ ⊹ ˖ 🍎˖⁺‧₊⟡₊˚⊹ ⋆🍎
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (83)