Print Profile(2)
Description
Boost Me (for free)
Creating is not easy, thank you for your support ❤️
After printing, use a small knife to trim the excess material from the base, and if it feels too tight, extend and retract it several times for a smoother fit
Since materials vary across manufacturers, resulting in differing shrinkage rates, consider scaling the model up by 1003% after downloading if it feels too tight
V3: Added a smaller configuration, reduced by 40%, with a length of only 95mm and enhanced strength. A reinforced version has also been added, featuring 4 walls and 40% infill
V2: Added PLA and PETG configurations, both tested and printed; refer to the images and select your preferred material. Remember to retract the extension rod when blowing
V1: An exceptionally loud bird whistle, requiring no supports; print directly
Suitable for children's play or for use in street vending
The model comprises three parts per plate, with a print time of 12 hours
After printing, insert the slender rod into the blowpipe, then seal it with the threaded plug
PLA is the recommended material; tested on both A1 and P1S machines using a glass build plate, the configuration includes a brim to ensure problem-free printing (see images 2 and 3)
If you appreciate this model, please consider boosting my efforts, thank you!
Boost Me (for free)
Creation takes effort; your support is greatly appreciated, thank you
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (52)