Articulated Cute Snail

Tips for printing:

• Filament: PLA (only use PLA)
• Supports: No!
• Layer height: 0.16mm (optimal) (0.2mm also works)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

You can scale the snail a little smaller if you want. When scaling down the model, please make sure that the eyes do not become too small!

Colors and filament I used (4 Color Version):

• PLA / Orange - for the body
• PLA / Red - for the snail shell
• PLA / Black - for the eyes
• PLA / White - for the eyes

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!