Elegoo Saturn Vat Holder

Makerworld won't let me mark this as a share only as an original or a remix. To be clear I didn't design this or modify it in anyway, just getting this uploaded on Makerworld in case anybody else has a Elegoo Saturn they needed a resin vat drain for as well. The files are the exact stl files from JIMMI on Thingiverse and then I uploaded my print profile from Bambu Studio as well.

I printed on my A1 with .4 nozzle, .20mm Standard profile, 20% infill, auto tree supports bed only

Necessary Parts:

3x M5 Nut
3X M5x20mm Bolt
1x 20x20x400mm (or longer) extruded aluminum

JIMMI's Summary:

I found a few resin vat holders but none that would fit my Elegoo Saturn. I decided to make my own version and share it with everyone!

Fitment is a little loose on purpose to accommodate the alignment bolts on the bottom of the resin vat and to avoid damaging the FEP film.

There is a 5 degree tilt to allow the resin to flow off the vat easier.

YOU WILL NEED:
3x M5 Nut
3X M5x20mm Bolt
1x 20x20x400mm (or longer) extruded aluminum

These are the parts I have used:

Extrusions: https://www.amazon.com/gp/product/B07V32DJJP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Nuts and Bolts: https://www.amazon.com/gp/product/B07WZHN2XS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

NOTE: I am NOT affiliated with any of the products linked above and DO NOT receive anything (monetary or otherwise) from purchases.
.
I have also included the designer I got the idea from: "True_Scott". They did a great job but it did not fit my specific printer. I also added some features I liked but kept some features I did like.

If you do not have an Elegoo Saturn then check out their design, it may just work for you!

UPDATES:

V1.1 Changes:
-Increased clearance on vat holder to prevent damage to FEP film.

V1.2 Changes:
-Increased vat screw cutout size.

V1.3 (Current Version) Changes:
-Increased base thickness.
-Recessed base to help with spills and adds rigidity.
-Includes a larger base for larger bottles!

Print Settings

• Printer brand:

  Prusa

• Printer:

  I3 MK3S

• Rafts:

  No

• Supports:

  Yes

• Resolution:

  0.15

• Infill:

  20%

• Filament brand:

  Prusament

• Filament color:

  Galaxy Silver

• Filament material:

  PLA

• Notes:

  Printed on Prusa i3 MK3S with stock "0.15mm QUALITY" settings using Prusament Galaxy Silver PLA

  These are the parts I have used:

Extrusions: https://www.amazon.com/gp/product/B07V32DJJP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Nuts and Bolts: https://www.amazon.com/gp/product/B07WZHN2XS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

NOTE: I am NOT affiliated with any of the products linked above and DO NOT receive anything (monetary or otherwise) from purchases.