OSRS Runes - Free 3D Print Model

Search models, users, collections, and posts

TugBreath

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

To fit A1 Mini

7.5 h

2 plates

4.7(3)

0.12mm layer, 2 walls, 15% infill

6.7 h

1 plate

4.3(4)

Open in Bambu Studio

Boost

270

282

Released

Description

Another free upload. All 3D files should be free. Do whatever you want with them.

Here is a pack of OSRS Runes you can paint using the fill option. I made them at .20 quality and 5% infill using gyroid.

if you like them please leave a boost and a like. Thank you friends.

osrs

runescape

runes

Comment & Rating (16)

@C0fii

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Printed 2x of each with the size of a 2 EUR coin

The profile uploader has replied

@Kazsuki

Boosted

thank you for photos, they look amazing!

@giulio_isa

what settings did you use? i'm having a hard time with this print, as the second/third layer seem to mess it up.

@CaptainPkmn

Print Profile

To fit A1 Mini

Printed one. The bottom seems to sometimes thread off but I heated it up and it's OK.

@giulio_isa

Print Profile

0.12mm layer, 2 walls, 15% infill

Not printeable with different layer height, and if you print without the top is very unsmooth

The profile uploader has replied

@Kazsuki

Boosted

Yes that is correct you will need to sand these regardless of which orientation you print it in, there will always be layer lines, limitations of FDM printing. if you would like perfect round shapes then you'll have to go with a resin printer.

@cheepmeep

how do I change the plastic type from petg to pla?

The designer has replied

@TugBreath

that is a slicer setting, try a youtube video as it is alot to type. its just the drop down menu on the filament types and then slice the plate

@ProfChaos

Print Profile

0.12mm layer, 2 walls, 15% infill

The profile uploader has replied

@Kazsuki

Boosted

thank you for the rating :)

@Kazsuki

Boosted

thank you kindly

@user_3559446316

Print Profile

To fit A1 Mini

This was actually my first failed print (plate 2), and first overnight print. Failure was my fault, due to dirty build plate. My son-in-law still loved them.