Airbrush Holder/Stand

This is a holder I designed to support the Badger 105 Patriot airbrush, but should also work with any top-fed airbrush without an airflow adjustment valve on the bottom of the barrel (for example, the Gaahleri Mobius 0.2mm will not fit due to the airflow adjustment valve below the paint cup).

Once printed, the holder should be mounted to your work surface using double-sided tape or adhesive-backed Velcro (I prefer the latter so I can remove it when not in use).

The supplied .3MF print is sliced for generic PLA and is comprised of two parts - the airbrush holder and a plug for the bottom. The plug is optional but helps add more surface area for dual-sided tape or sticky-back velcro. The plug is a slight friction fit to the holder, but can also be superglued in if desired.

Confirmed by folks in the community to NOT fit super well in this holder:

-Gaahleri Mobius 3

-Harbor Freight airbrush

-Iwata Neo

-(Perhaps others - check the comments before printing if you don't have a Badger 105 Patriot!)

Thanks to the people who are giving this a shot and letting me know if it doesn't fit your airbrush. If you run into fitment issues with yours, please feel free to leave a comment with the brand and model of your airbrush and I'll add it to the above list.