AMS Lite Filament feed cutout for Ikea Lack Table - Free 3D Print Model

Search models, users, collections, and posts

Chaq

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

8.7 h

5 plates

4.9(12)

Open in Bambu Studio

Boost

110

296

188

Released

Description

AMS Lite filament passthrough for Ikea Lack table. Big enough for toolhead clearance, works perfectly with 85mm lack leg extension. I have cut mine with jigsaw but it can be easily done by hacksaw, hole saw etc. I have create template to make whole process easier. You will need 28x 3mm/12mm Wafer screws or similar size.

Items i've used for my setup:

https://makerworld.com/en/models/15814?from=search#profileId-61032

https://www.printables.com/model/781523-lack-enclosure-leg-base-riser-customizable-height/files

https://makerworld.com/en/models/22666#profileId-20574

https://makerworld.com/en/models/166109?from=search#profileId-182374

https://www.aliexpress.com/item/1005007536224139.html?spm=a2g0o.order_list.order_list_main.10.6edb1802mjaCPO

Boost Me (for free)

If you think my work is worth you click, you can do it here 😊 THANKS !

Comment & Rating (40)

@Woll_Vieh

Print Profile

0.2mm layer, 3 walls, 15% infill

Superb idea Everything worked perfectly

Show original

@robertgb

hi. what dimension do you have at leg riser? and how do you put ams lite, any custom support to hold it? any picture?

@Woll_Vieh

Replying to @robertgb :

The connectors I scaled to 18cm: https://makerworld.com/de/models/540271-ikea-lack-tabel-riser-connector?from=search#profileId-457644 https://makerworld.com/de/models/134362-ams-lite-vertical-stand-holder?from=search#profileId-145836

(Edited)

Show original

@robertgb

Replying to @Woll_Vieh :

thanks

@BartasRybson

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

did it, like it!

The profile uploader has replied

@Chaq

Awesome :) AMS on the wall?

Show original

@robertgb

Print Profile

0.2mm layer, 3 walls, 15% infill

(Edited)

@VeeDubb65

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

I did a terrible job cutting the hole for this and had to expand on both sides. still worked fine. Good forgiving design.

The profile uploader has replied

@Chaq

did you use a template ?

@VeeDubb65

Boosted

Replying to @Chaq :

I used the template that it comes with, but I didn't have a good way to cut through both sides at once. had to mark one side, flip it over, mark the other. I measured wrong on the second side, so the hole didn't line up. 100% my fault, but the flange on the model is wide enough I was able to make it work and it still looks perfect in spite of my mistake.

@Chaq

Replying to @VeeDubb65 :

Great ! Enjoy

@BartasRybson

Boosted

I want to build the same station. Can you link me leg extensions and everything you used?

The designer has replied

@Chaq

https://makerworld.com/en/models/15814?from=search#profileId-61032 https://www.printables.com/model/781523-lack-enclosure-leg-base-riser-customizable-height/files

@Chaq

Thanks for the boost ;) more drawers https://makerworld.com/en/models/22666#profileId-20574

(Edited)

Show original

@BartasRybson

Boosted

Replying to @Chaq :

What kind of cable extension did you use for ams lite?

@LSS122

Boosted

Very nice design. I'm interested in the mount for the AMS. Could you post a pic of it, or explain how you did it? Thanks

The designer has replied

@LSS122

Boosted

My bad, did not see the above post. Thanks!!

@Chaq

Replying to @LSS122 :

Thanks! good shout I will make description clear with all the links. 🙂

@xKen

Doesn't the bed of the A1 extend beyond the footprint of the lack table? Or do you not enclose it and just use it open, like a shelf?

The designer has replied

@Chaq

its just a shelf.

@user_2427358578

If you leave the back open that the cable can move troughe everything is inside the diameters of the lack table. If you would close it fromm all sides the back bed cable would not have enough space to move.

@xKen

Replying to @user_2427358578 :

Yeah, in other words, you can't enclose it.

@alvarol

In that position does the AMS arrive well or do you have to change the tubes and put a cable extender? thank you

The designer has replied

Show original

@Chaq

you need to change tube lengths and add ams cable extension. thanks

@Amarok71

Print Profile

0.2mm layer, 3 walls, 15% infill

Not installed yet, but printed without any problems at 125% speed.

@devesh1982

Print Profile

0.2mm layer, 3 walls, 15% infill

Great idea to clear up poor cuts using an electric saw.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.