Tukkari TF Fan Duct - 120mm Fan to 100mm Pipe - Free 3D Print Model

Search models, users, collections, and posts

MrGira

Household>Other House Models

IP Report

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Bill of Materials

List other parts

M4x40 hex screws x 4:

Description

Materials and specifications:

PETG or ASA/ABS reccomended;
0,2 layer height;
5 perimeters/shells;
120mm fan (personally I used this https://amzn.eu/d/gUrk2gO plugged into an octopi);
4 M4x40 hex screws;

Assembly

Mount a 120 mm fan sandwiched between the fan duct and the hepa filter included with the Tukkari TF enclosure in a pull configuration, be sure the air is drawn out and not pushed inside the enclosure.

Test the system by lighting and blowing out a small candle near the fan.

You can either print the fan and duct already as one or separately.

Comment & Rating (2)

@user_2714907919

Hello, Excellent piece, I really like it! Where can one obtain these filters? If they are readily available at a reasonable price, I would be keen to utilize the printed part

The designer has replied

Show original

@MrGira

I bought that particular filter from Tukkari themselves, although I'm pretty sure you can find them online and 3d print the assembly mount. Mind that you have to take the measurements for the large gasket you can see on the edge.

No more