Drying Tray With a Funnel V2 (Customize) - Free 3D Print Model

Search models, users, collections, and posts

page7

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

v2. 16x16cm

Designer

2.1 h

1 plate

4.9(112)

16x16cm

Designer

3 h

1 plate

4.8(26)

Bottom pre-arranged, mobile app can directly send to print

2 h

1 plate

4.9(19)

Open in Bambu Studio

Boost

588

1871

208

153

1.7 k

1.1 k

Released

Description

Support customization

No support is required.
please use PETG filament for printing.
The temperature of the heat bed is 70°C. If tools such as ovens are to be used, do not exceed 65°C or use other temperature-resistant materials such as ABS.
If you need customization, please refer to the configuration in the following diagram to turn the base plate into a mesh.

UPDATE:

2024-12-04

V2 Increasing the side height to prevent the desiccant from spilling out

Boost Me (for free)

Comment & Rating (208)

@user_1597609853

Print Profile

Bottom pre-arranged, mobile app can directly send to print

Printed with ASA, perfect

The profile uploader has replied

Show original

@caiban

Thank you for printing my configuration, but why is the base solid? I was startled and quickly downloaded the configuration to check again, confirming that I hadn't uploaded the wrong one. Did you modify the configuration yourself during printing?

Show original

@caiban

If you printed using my uploaded profile, the bottom should look like this, given a successful print

(Edited)

Show original

@user_2905677831

Replying to @caiban :

Mine started printing that way too. I stopped Was resized maybe tat has something to do with it!

@user_3040263221

Print Profile

v2. 16x16cm

Printed great in PETG Translucent

@3DPrintingNL

Boosted

Nice model! Printed in Bambu PA6-GF, so I can dry my silica faster with higher temps 😁 I only have 1 issue, when tilting the tray some silica balls spill over the wall, is it possible that you can make another version where you can make the walls a little higher? (I painted the parts that should be extended red in the picture)

The designer has replied

@page7

Yes, I have also noticed this issue and will find a way to optimize it later.

@page7

updated~

@3DPrintingNL

Boosted

Replying to @page7 :

Thanks 😁👍

@Martol

Print Profile

Bottom pre-arranged, mobile app can directly send to print

absolutely brilliant and flawless print with Bambu PETG

The profile uploader has replied

@caiban

Yes, this is how it should look. Thank you for printing with my uploaded profile. 👍👍👍

Show original

@ety1

Print Profile

16x16cm

Excellent! Printed great even scaled down.

The profile uploader has replied

@page7

Thank you for your compliment! This is a customizable model. You can customize the size and diameter you need on the PC version of our website, so there's no need for scaling.

@user_2905677831

Replying to @page7 :

When I do it is solid on the bottom, even after adjusting your settings

(Edited)

@Ricosprinter

Print Profile

v2. 16x16cm

Perfect tray for drying silica beads 5 Stars – Absolutely brilliant design! I dried about 1.3 kg of silica beads using this tray – worked like a charm! Printed in ABS with the bed at 110 °C and the AUX fan set to 60%. Each drying cycle took around 90 minutes, mixing the beads every 20 minutes. After drying, I was left with about 1.1 kg – meaning it pulled out a solid amount of moisture. Super functional, sturdy, and efficient. Definitely 5 stars from me – rischdisch goil, junge! 🔥

@darthjedi

Boosted

Love the ability to customize, and the instructions how to make the grid work. Print worked awesome, scaled it down to fit in my small food dehydrator. Printed in PETG, running at 140F, hoping it doesn't melt!

The designer has replied

@page7

Wish you success!

@CommanderRex

tried printing this twice from bambu studio, no luck. First petg print failure i have had on my p1s. Printed another makers model similar to this no problem, not sure why this didn't print.

@caiban

It is recommended to dry the filament

Show original

@MTNEARZ

Bambu ASA white. printed with a brim but still had some lifting of the print on my X1C. probably needed the bed temp up a little higher and some fan tweaking, but wasn’t really concerned about it for this print, works great and fits well in my small shop microwave.

@gooddogsbrent

Boosted

Print Profile

v2. 16x16cm

perfect in petg!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.