Headphone Charging Stand

Hi Everyone,

Here is a universal headphone charging stand so you can charge your wireless headphones without having to fiddle with cables.

This should fit most headphones. If you know your headphones are of a unique shape or size this may not work…

you can adjust the distance between the earcups with the appropriate spacer, the distance between the end of the earcup and the charger location with the screw and nut system, and the charging port height with the the port screw.

Also makes a great non-charging headphone stand!

Materials

• This is made to work with this magnetic cable: https://www.amazon.com/dp/B0BVMB9V9R?psc=1&ref=ppx_yo2ov_dt_b_product_details
• if you're familiar with 3d modeling software's you may be able to edit the part that contains the cable cutout so that you can use another cable.
• This does not require screws or glue - but 2 rubber bands are recommended if you want it to spring open.

Measurements

*note: this depicts the 0mm connector which is technically 10mm itself but is the smallest connector possible so hence we will call it 0.

If you have any issues with fitting your headphones (hopefully you notice before you print) please let me know and i may be able to update with some alternative parts.

If you print one of these bad boys and are feeling helpful, please comment below your headphones and connector/spacer used.

Assembly