Search models, users, collections, and posts
688 Ball Bearings
Remixed by
IP Report
Print Profile(3)
0.12mm layer, 2 walls, 15% infill
Designer
15 min
1 plate
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
28 min
1 plate
0.4mm 喷嘴，0.08mm layer, 2 walls, 15% infill
28 min
1 plate
Open in Bambu Studio
Boost
106
220
19
4
465
265
Released
Description
Content has been automatically translated.
688 standard ball bearings, with an inner diameter of 8mm, an outer diameter of 16mm, and a width of 5mm. They are manually assembled and can be used for installing tourbillon bearings. Each print requires only 1g of filament and can be printed in just 15 minutes. When installing, be sure to use tweezers to install the ball bearings, refer to the instruction, and will attempt to print it as a whole in the future to see if it can be successful. The model is from https://www.thingiverse.com/thing:3413668 and was sliced for the Bambu A1.
Documentation (1)
Assembly Guide (1)
Comment & Rating (19)