Electric unicycle (EUC) universal pads

These pads are fully customizable, allowing you to adjust infill for your ideal level of stiffness. The default setup strikes a balance between comfort, rigidity, and jumping ability. For a softer, more cushioned feel, remove the custom infill entirely.

3D Printing Guidelines

• Scaling: These pads are sized for larger wheels; for smaller wheels, reduce the X and Y axis scale to between 50-90% while keeping the Z axis at 100%.
• Material & Print Settings:
  • Material: 85A TPU
  • Bed Temp: 60°C
  • Nozzle Temp: 250°C
  • Layer Height: 0.3 mm
  • Nozzle Size: 0.8 mm
  • Perimeters: 3
  • Top Layers: 3-4
  • Bottom Layers: 7-12
  • Infill: Default infill is 10% gyroid, while custom infill regions have 25% gyroid for added stiffness. Some foot peg areas are set at 35% infill—refer to the project file for details.
  • Flow Rate: Set to 4.5 mm³/s (or appropriate for your printer) to control print speed.

For added stiffness, increase the perimeters or top/bottom layers—three perimeters are the minimum for durability. Make sure your filament is dry and consider a warm enclosure to improve results.

The files include front and back pad designs. If your print bed is small, it’s best to print each piece separately.