Decals 3D Cabin A6M2 ZERO 3DLabPrint, 0.2mm height
Print Profile(0)
Description
I converted the pdf file into an svg file. And in fusion 360, I just made a sketch of the svg and extruded with 0.2mm.
I have also attached the f3d file in case changes are desired.
On my ender 3 V3 SE I printed with the help of Cura with the following:
Layer Height: 0.2mm
Initial Layer Height: 0.15mm
Line Width: 0.4mm
Wall Line Count: 3
Wall Ordering: Outside To Inside
Print Thin Walls: Yes
Minimum Feature Size: 0.001
Skin Removal Width: .42mm
Printing Temp: 215
Flow: 102%
Print Speed 55
Surface Mode: Normal
Notice: I personally glued the central parts C3 and C4 to the canopy instead of parts C5 and C6!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)