Search models, users, collections, and posts
Garmin Nuvi 2599LMT-D Mount Holder
IP Report
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
52 min
1 plate
0.2mm layer, 3 walls, 22% infill
1.6 h
1 plate
Open in Bambu Studio
Boost
5
12
2
0
33
12
Released
Bill of Materials
List other parts
- x 1:
Description
Somehow I lost my original mount holder for my Garmin Nuvi 2599LMT-D GPS and designed and printed my own.
I printed it with PETG, not sure if PLA will hold long.
I have no idea what the individual parts are called so made them up
I printed the base with 100% infill and 3 walls. I did try 15/25% at first but it just wasn't strong enough and ripped apart while I was trying to remove the brim.
The rest I printed with 15%.
I used 2x M2x6mm self tapping countersunk screws for the "slider garb and 1x M2x8mm for the Slider and Spring Loaded Lip
You'll also need a spring from a pen, size is ~ 3.5Diax22mm long
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (2)