My creations for the Martian II Quadcopter frame

28-DEC-2016
martII_arm_protect_v0_6.STL : Smaller and light arm protectors

26-DEC-2016
Added some arm protectors, indoor flying destroys the arm tips
martII_arm_protect_v0_2.STL : first iteration

30-NOV-2016
Measured the angles and they are actually 15 - 30 and 45 degrees
martII_30deg_v_1_3.STL : back
martII_15deg_v_1_0.STL : New for the low angle users

24-OCT-2016
Removed old files and added theese, always print laying on the side, and use support
martII_25deg_v_1_0 : New version that actually fits with the FPV camera angle
martII_32deg_v_1_0 : New version that actually fits with the FPV camera angle
martII_45deg_v_1_0 : New version that actually fits with the FPV camera angle

20-JUL-2016

martII_30deg_v_1_1 : 30 degree with a higher bottom point, for more flexible tri-blades (not hitting the camera)

12-JUN-2016

martII_30deg_v_1_0 : 30 degree camera mount, should be used with this http://www.thingiverse.com/thing:1381295 print oriented on the side for strongest result and a layer of >= 0.2mm