Adorable Lucky Dragon Baby (Set)

Cute Auspicious Lucky Beast Babies (A set of 3)

• Exquisite small ornaments, Print in Place with integrated supports, great for selling at markets, small items for children to play with

• Print supports are concentrated on the back brim of the hat, requiring careful removal

• Printing "seams" have been set to the back, not affecting the front appearance

• 3 pieces single plate 1.5h fast print, 0.2mm layer height, good print quality, recommended to print at 100% original speed

• If print overhang quality is not ideal, pay attention to cooling! Also pay attention to filament flow rate calibration and drying! For other issues, you can leave comments for discussion, and configuration issues will be modified and updated as soon as feedback is received

3D Printing Tips and Preparation Notes

(Most models released by creators have been tested and are compatible with all printer models, many times when print issues occur, you need to check if your printer and filament are normal, this is a skill you need to learn to enjoy 3D printing, if you have any questions, you can actively discuss them in the comments section, this is also the meaning of building such a community)

Some considerations are explained below, for more questions, you can ask customer service or check the Bambu Lab Wiki, where you can learn a lotPrint Quality and Troubleshooting | Bambu Lab Wiki

• Ensure the build plate is clean, regular cleaning of the build plate is recommended! Grease residue from hands after touching the print surface can significantly reduce bed adhesion, and also debris from previous prints and tiny residues can affect the first layer print quality, thereby reducing the success rate
• Pay attention to filament drying, this will greatly affect your print quality and printing experience! Filament will inevitably get damp after being stored for a long time, if stringing occurs, it is recommended to ask the manufacturer for drying parameters to dry the filament, and also most manufacturers do not dry their filament before it leaves the factory, therefore newly unsealed filament is still a bit damp, and it is also recommended to dry it before use
• When using filament from a new manufacturer, it is recommended to immediately perform filament flow rate calibration and modify the calibration coefficient, this will greatly affect your print quality, and is also a necessary process for new filament to adapt to your printer
• If you encounter issues where print quality suddenly deteriorates and the success rate is low, check if the nozzle is clogged, you can also try recalibrating the printer
• Print at the recommended speed in the model description. Overhang quality is directly related to print speed, an appropriate speed (neither too fast nor too slow is good) allows the material more time to cool and solidify during deposition
• Hotbed and nozzle temperatures should be set appropriately according to different materials. Temperatures that are too high or too low can cause warping, layer deformation, or adhesion issues, thereby affecting print quality and success rate