40oz 30oz Rotary Jig for Stanley & Dupes
Print Profile(1)
Description
Quick design down and dirty tumbler jig for 40oz & 30oz Stanley and Stanley dupes found on various online marketplaces. I made this for my WeCreat 40w laser rotary to solve the non-working area, but it will probably fit others. The inside is approximately 80mm or 3 1/8" wide so if your rotary jaws will fit inside and grip outwards it should work. I also included a stepped shelf at 25mm or 1" inside for the jaws to sit flat against so your tumbler will sit square and even. The 40oz Stanley and dupes spin right on but the 30oz Stanley is a little snug but still easy to get on. I used the default automatic standard snug supports. They were a pain to remove so if you have better support settings by all means use them.
I used 4 walls, 5 top & bottom layers ad 5% gyroid infill and it feels very sturdy.
This worked perfectly for my 1st ever tumbler but use at your own risk. I AM NOT RESPOSIBLE for damaged tumblers or lasers. Make sure the jaws are tight, and the tumbler is spun all the way on and snug.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (43)