Playseat Trophy Feet - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Daniel.Leistner

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 5 walls, 50% infill

Designer

11.5 h

1 plate

5.0(6)

Open in Bambu Studio

Boost

137

193

Released

Bill of Materials

List other parts

Rubbermat x 4:

Description

Removed the original slot for risers and integrated a new frame designed to accommodate 90x90x15mm vibration isolation mats, such as those available for washing machines. This modification aims to effectively dampen vibrations from the direct drive wheel and pedal shakers, preventing transmission to the ground and enhancing overall stability.
(Also added some roundings for aesthetics)

Used Rubber Mats:
CLARE Premium Schwingungsdämpfer Antirutsch Pads 90x90mm Waschmaschine Unterlage Antivibrationsmatte Antirutschunterlage Dämmmatte Vibrationsdämpfer Trockner | 4 Stück 15mm : Amazon.de: Elektro-Großgeräte

simracing

sim

racing

Comment & Rating (14)

@BRsheldon

Print Profile

0.2mm layer, 5 walls, 50% infill

Great, printed in Sunlu PETG. I used 7x25mm strips to hold them in addition to the 9x9x1.5 mm anti-vibration feet.

(Edited)

Show original

@user_3321383516

Boosted

Awesome design! I just wish it would take the BXI equipment mat from Amazon, 4x4x0.8 inches. Really kills any vibrations from my treadmill. Tinkering this model to suit is beyond my current skillset 😔

The designer has replied

@Daniel.Leistner

I can try adjusting it if I find the time, but since I'm from Germany, you have to check yourself if it fits since we only got them in metric :)

@user_3321383516

Boosted

Replying to @Daniel.Leistner :

Danke! This weekend I got on the coffee, and worked out how to do it. I've adjusted the design and it's printing now. 2 feet are out and they're fitting well! I'll upload it once I've got the last 2 out. Thanks again for a great design and base to work off 🙌

@wasabinator

Boosted

This is great, thanks for sharing it. I used an exacto / stanley knife to cut some 10x10x1.4cm blocks I got from the local Bunnings here in Australia

@iSpirith

you print it whitout support ? its too big bridges on the bottom

The designer has replied

@Daniel.Leistner

Yes i printed it without, it isn't the most beautiful surface but it prints and there are the rubber mats inside covering it anyway so i didn't bother with support :) (sorry for the late response ^^)

(Edited)