Hueforge of a RUF Porsche "Yellow Bird"
Print Profile(1)
Description
My son likes 3D printing and cars. This small project was perfect for a sunday afternoon printing session.
Boost Me (for free)
you like it? give me a little motivation to upload all my projekts.
Here are the hueforge settings:
Project: RUF Yellowbird.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.12mm
The Model is 80x51.74mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.4mm and the Actual Depth is 2.4mm
Filaments Used:
PLA F4P green Transmission Distance: 3.2
PLA F4P schwarz Transmission Distance: 0.1
PLA F4P Yellow Transmission Distance: 3.2
PLA Amazon blue Transmission Distance: 5.6
PLA BambuLab Basic Gray Transmission Distance: 1.4
PLA F4P White Transmission Distance: 8
This print uses 6 unique filaments
Swap Instructions:
Start with green
At layer #7 (0.6mm) swap to schwarz
At layer #9 (0.76mm) swap to Yellow
At layer #10 (0.84mm) swap to blue
At layer #11 (0.92mm) swap to Gray
At layer #19 (1.56mm) swap to White
At layer #22 (1.8mm) swap to Yellow
At layer #23 (1.88mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)