Kung Fu Panda - support for up to 8 colour print

UPDATED - changed model from stl to step format. It fixes some issues with the colour printing on the belt and also allows the selection fuzzy skin on the torso parts, the legs, the head, and the eyepatches to give a more ‘realistic’ print.

Corrected errors in model that prevented it from slicing correctly. I also separated the different colour areas to allow for fill painting as well as adding some additional areas: eyes are divided into sclera, iris, and pupil; the belt sections support different colours and I also divided the leg wrappings from the boots.

The printed example is from a test print before I modified the belt and boots and was printed at a smaller size (about 80%)

I used the 0.2mm nozzle and added a pause to switch from the red for the base to green for the eyes. I don't have a second AMS.

WARNING - this model switches colours at least once on almost every layer, on factory defaults this will produce a tremendous amount of ‘poop’ with the .2 nozzle the model is about 10% of the amount of filament used. But you should be able to fit 6 copies on the plate at 100% size.